MR150KA-1-CE-ND042334

Standard Features:

• All steel or stainless steel construction.
• Compact design
• Design factor 10:1 on main load bearing components
• Design temperature: -20°C
• Planetary gear box enclosed in drum for better protection and space saving
• Gear type air motor
• High efficiency planetary gearing inside drum for better protection and minimum overall dimensions
• All rotating parts are supported on ball and/or needle bearings
• One internal automatic multidisc brake springs applied, pressure released
• One external automatic drum band brake spring applied, pressure released
• Helical grooved drum (for wire rope diameter 10 mm)
• Local throttle control with automatic return to neutral position and locks when released.
• Main power emergency stop device
• Overload protection device adjusted during factory tests
• 3 way valve with 2 air inlets. Secondary air inlet to be connected by the customer to an auxiliary power supply source on site (e.g. a nitrogen bottle) for emergency operation in case of main power failure.
• Emergency lowering system (2 litre tank releasing both brakes)
• Slack wire detector
• Adjustable upper and lower limit switches inside the drum
• Assisting spooling device for better rope winding at no load (Press roller)
• Stainless steel drum guards
• Marine Paint (150 microns)
• Water separator-Filter-Regulator-Lubricator set
• Lifting lugs for easy installation “DNV” Type approved design
• CE marking and ATEX marking for Zone 1 and 2 (EX II 2 GD c IIB 135°C X)

Technical Data with 6.3 dynamic working pressure:

• Nominal lifting capacity at 2nd rated layer: 150 kg
• Working pressure range: 5 to 7 bar
• Lifting speed at rated load: 0 to 30 m/min.
• Free air consumption: 0 to 2.5 m3/min
• Wire rope diameter: 10 mm (not included in this quote)
• Working rope capacity: 54 meters (on 2 layers)
• Full drum storage rope capacity: 152 m (on 5 layers)
• Weight of winch (without rope): approx.210 kg

Options included:

• 150 m of 10 mm diameter non rotating, galvanized wire rope equipped with a thimble and sleeved at one end, spooled on the winch at factory

AVISTA LLC is authorized distributor of Ingersoll Rand. We ship worldwide directly from IR factory. Contact us